DeckMath
TimberTech composite mid · Tigerwood look

TimberTech PRO Legacy Calculator

The streaked-hardwood-look deep-cut for TimberTech PRO Legacy — the mid-tier capped composite focused on the IPE / Tigerwood aesthetic. Four colors built around the streaked-tropical look (Mocha, Tigerwood, Espresso, Ashwood), 30-yr structural + 30-yr fade & stain warranty. Compare against PRO Reserve and EDGE Prime+ on the same deck. Real BoM, CONCEALoc clips, optional accessories, 3-line composite auto-compare.

By SemiSoftwares · DeckMath editorialReviewed against IRC 2021
Start calculating
Get 2–3 free quotes
2026-Q1 retailComposite tier — Reserve + Legacy + EDGE12+ colors30-yr structural + fadeTigerwood IPE-look3D viewer
3·Composite lines
12+·Color swatches
30-yr·Structural + fade
$/sqft·Live update

Inputs

Dimensions

ft

ft

Area · 192 sq ft·Stocked in 12/16/20 ft
in

IRC R312 requires 36″ guardrail above 30″.

192 sq ft TimberTech AZEK Vintage deck in Mahogany. Project total $19,064 to $26,043.
TimberTech · AZEK Vintage·Northeast
$19,064 – $26,043$99–$136 /sq ft installed
MahoganyVintage Hot in sun50-yr structuralpvc192 sq ft · parallel
Boards
445 lf · 7% waste
CONCEALoc boxes
90/box · 50 sqft
Materials
Low $5,990
Labor
1.22× region

Project advisories · IRC 2021 + TimberTech specs

Guardrail included — TimberTech Reserve Rail (composite)

IRC R312

IRC R312 requires 36″ guardrail above 30″. 40 lf of TimberTech Reserve Rail (composite) priced at $90/lf.

TimberTech warranty · 50-yr structural · 30-yr fade & stain

TimberTech Limited Warranty

AZEK Vintage is 100% PVC — the longest structural warranty in residential decking. Register at timbertech.com/why-timbertech/warranty within 30 days.

CONCEALoc · 3 boxes + 29 loose clips

TimberTech install manual

TimberTech CONCEALoc — 90 clips per box, 50 sqft coverage at 16″ joist o.c. Box price $85.

Heat caution — Mahogany runs HOT in full sun

TimberTech AZEK technical data

Dark colors (Mahogany, hex #5A2820) measure 145-160°F at the surface in 90°F sun. PVC reflects more heat than capped composite — even AZEK Vintage in dark colors stays cooler than equivalent Trex Transcend.

TimberTech bill of materials

AZEK Vintage — Mahogany
23 boards · 445 lf · 26 rows · 7% waste
23 board
$3,205
TimberTech Reserve Rail (composite) kit
40 lf · top + balusters + posts (composite)
40 lf
$1,620
Framing — 2×10 PT joists
13 × 12'
13 joist
$491
TimberTech CONCEALoc
3 boxes (270 clips · 150 sqft coverage) · CONCEALOC-90
3.0 box
$255
Stair materials (composite)
4 steps · stringers + composite treads + landing pad
4.0 step
$243
Framing — 2-ply 2×10 PT beam
2 × 16'
2.0 beam
$212
Hangers + post bases + caps
13 hangers · 3 ABU66Z + PC6Z
19 pc
$163
Posts — 6×6 PT
3 × $52
3.0 post
$156
Ledger bolts + Z-flashing
16' ledger
1.0 lot
$63
CONCEALoc — loose clips (partial)
29 clips at $1.15 each
29 clip
$33
Materials subtotal
$6,441

TimberTech retail pricing 2026-Q1 (Lowe's Pro + AZEK Pro Platinum channel). Each line includes part numbers where applicable.

Live preview

Visualize your TimberTech deck

Photoreal 3D · plan view · framing breakdown. Color matches the AZEK Vintage Mahogany variant.

PBR materialsHDR lightingAZEK Vintage
Loading 3D scene…
16′ × 12′
TimberTech AZEK Vintage
Joists
13 × 12′
Beams
2 × 2-ply 2×10
Posts
6 × 6×6
Boards
27 rows

Same deck, every TimberTech line

tap to switch

Project all-in

Materials (TT BoM + framing + hardware)
AZEK Vintage retail · 23 boards · 3 CONCEALoc boxes
$5,990 – $6,441
Labor (installed)
Northeast · 1.22× national · 1.25× composite premium
$9,582 – $12,400
Add-ons
Railing install · stairs · drink rail · lighting
$3,172 – $4,514
Soft costs
Permit · demo (only included items)
$320 – $320
Contingency reserve (10%)
Industry-standard cushion
$2,368
Project total (low – high)
Plan around the high. Get 3 AZEK Pro bids — DeckMath should land within ±15%.
$19,064 – $26,043
Find a TimberTech AZEK Pro installer

TimberTech's vetted installer network — opens timbertech.com.

Register the 50-yr warranty

Within 30 days of install. Need board serial numbers + install date.

Comparing brands?

Open the Composite Deck Cost Calculator to A/B TimberTech against Trex, Fiberon, Deckorators, and more at the same dimensions.

Open

Estimates use 2026-Q1 national-median pricing (Lowe's Pro + TimberTech AZEK Pro channel). Expect ±15% variance. DeckMath is not affiliated with TimberTech or AZEK Building Products; brand names are trademarks of their respective owners.

Get matched

Want 2–3 free quotes for this exact deck?

We'll send your plan to vetted local builders. Free, no obligation.

How to use

How to use the deck calculator in 7 steps.

  1. 1

    Pick a TimberTech composite line

    PRO Legacy (default, mid-tier hardwood-streak composite, 30-yr structural). Compare against PRO Reserve (premium multi-tonal cap) and EDGE Prime+ (value entry, Lowe's stocked). For AZEK PVC instead, use the AZEK Deck Calculator.

  2. 2

    Choose a Legacy color

    Four colors built around the streaked-hardwood aesthetic — Mocha (warm dark brown), Tigerwood (signature amber-brown with deep streaking that mimics genuine Tigerwood IPE), Espresso (near-black, gets HOT in sun), Ashwood (cool weathered gray). Tigerwood is the visual highlight — it's the most realistic tropical-hardwood-look composite on the market.

  3. 3

    Enter dimensions + pattern

    Length × width in feet. Pattern: parallel (7% waste, 1.0× labor), picture-frame (12%, 1.18×), diagonal 45° (15%, 1.12×). Calculator quantizes board count using TimberTech's stocked 12/16/20 ft.

  4. 4

    Pick a fastener

    CONCEALoc hidden-clip is the default — 90 clips/box, $85/box, ~50 sqft coverage at 16″ joist on-center. Cortex (color-matched plug system, 50/pack, $38/pack) is the face-screw alternative.

  5. 5

    Pick a railing

    Premier Aluminum ($175/lf, slimmest sightline), Reserve Composite ($90/lf, color-matched), or Builder Composite ($55/lf, value tier).

  6. 6

    Add accessories (optional)

    AZEK Drink Rail ($45/lf top-mount shelf) and TimberTech Lighting (post-cap + riser LED kit + 100W transformer + low-voltage wiring) are toggles.

  7. 7

    Read your Legacy BoM

    Materials breakdown with line + color + clip count, 3-line composite auto-compare, project all-in totals, IRC compliance flags. Save link, export PDF, embed.

Material guide

Composite vs. wood vs. PVC

TimberTech Legacy is a capped composite board. Composite lands in the sweet spot for most homeowners — wash-only upkeep at a mid-range upfront. See where it beats pressure-treated wood and where premium PVC pulls ahead, then recalculate on any line above.

Gray capped composite decking boards
This calculator

Composite

Best for · Most homeowners
Upfront
$3.20 – $6.40/lf
Lifespan
25 – 30 years (warranty)
Pros
  • Wash-only maintenance ($0.05/sq ft/yr)
  • Capped polymer surface resists stains, mold, fade
  • Lowest 25-year total cost for most builds
Cons
  • Higher upfront ($28–40/sq ft installed)
  • Hidden-fastener systems take 25% longer to install
  • Can run warm in direct sun (lighter colors mitigate)
Try in calculator: Trex Enhance · TimberTech Prime+ · Fiberon Good Life
Close-up of natural pressure-treated wood deck boards

Pressure-treated wood

Best for · DIY budget builds
Upfront
$1.85 – $4.10/lf
Lifespan
10 – 15 years
Pros
  • Lowest upfront cost ($15–25/sq ft installed)
  • Universally available — Home Depot, Lowe's, lumberyards
  • Workable with standard fasteners and tools
Cons
  • Annual stain/seal needed (~$0.45/sq ft/yr)
  • Splinters, splits, and warps over time
  • Higher 25-year ownership cost than composite
Try in calculator: PT 2×6 or 5/4×6 deck boards
Modern PVC capped-polymer deck around a home

PVC (capped polymer)

Best for · Pool & coastal decks
Upfront
$4.65 – $7.20/lf
Lifespan
30+ years (lifetime warranty)
Pros
  • Zero rot, zero mold — fully synthetic core
  • Coolest underfoot of the synthetics (mineral-core lines)
  • Best moisture and salt-spray performance
Cons
  • Highest upfront cost
  • Can move slightly more with temperature swings
  • Color palette narrower than composite
Try in calculator: TimberTech AZEK Vintage · Wolf Serenity

How we calculate

How DeckMath calculates this — IRC 2021 sources.

The TimberTech PRO Legacy Calculator is the composite-mid-tier deep-cut for homeowners who want the streaked-tropical-hardwood look without the IPE price tag. Legacy is TimberTech's mid-tier capped composite — 30-yr structural + 30-yr fade & stain warranty, dramatic wood-grain cap with prominent streaking. The signature color is Tigerwood (rich amber-brown with deep streaks that mimic genuine tropical Tigerwood lumber); the line also includes Mocha (warm dark brown), Espresso (near-black), and Ashwood (cool gray). At $4.80/lf retail, Legacy is roughly $0.70/lf cheaper than PRO Reserve and $0.70/lf more than EDGE Prime+. This calc covers the full TimberTech composite tier — Legacy as the focus plus Reserve and EDGE Prime+ for side-by-side comparison. CONCEALoc box count, optional accessories, 3-line composite auto-compare. 2026-Q1 retail.

IRC references

  • IRC 2021 R507 — Decks
  • IRC 2021 R312 — Guards (railing required when deck > 30″)
  • TimberTech CONCEALoc install manual — clip spacing (1 per board per joist)
  • TimberTech PRO Legacy warranty terms — 30-yr structural + 30-yr fade & stain

Verify against the published source: 2021 International Residential Code (ICC).

Per-LF retail prices reflect 2026-Q1 TimberTech composite pricing at Lowe's Pro + TimberTech AZEK Pro dealer channel. CONCEALoc + Cortex specs from TimberTech install manuals. 30-yr structural + 30-yr fade & stain warranty per TimberTech PRO Legacy published terms.

Deck-board linear feet
rows × length × (1 + waste%)

Rows = ceil(width × 12 ÷ (5.5 + 0.125)). Waste % is pattern-driven.

CONCEALoc box count
boxes = floor(total_clips ÷ 90)

Each CONCEALoc box ships 90 clips and covers ~50 sqft at 16″ joist on-center.

Legacy vs IPE cost comparison
legacy_total ≈ ipe_total × 0.50

TimberTech PRO Legacy in Tigerwood color costs roughly half what genuine IPE hardwood costs installed. Both deliver the streaked-tropical aesthetic; Legacy adds 30-yr warranty + no annual oiling. Run the IPE Deck Cost Calculator for the parallel estimate.

Composite labor premium
$35/sqft × 1.25 × pattern × shape × region

Composite installs are 25% slower than face-screwed PT. Pattern + shape multipliers compound.

Reserve vs Legacy vs EDGE pricing
reserve_lf = $5.50 · legacy_lf = $4.80 · edge_lf = $4.10

Within the TimberTech composite tier, Reserve is the premium, Legacy is the hardwood-streak mid, EDGE Prime+ is the value entry. All carry 30-yr structural except EDGE Prime+ (25-yr).

Save your plan

Don’t lose this estimate.

Your inputs are preserved in the URL — email it to yourself or copy the link so you can compare with contractor bids later. No account needed.

People also ask

Deck calculator questions, answered.

  • Legacy is TimberTech's mid-tier capped composite ($4.80/lf retail), focused on the streaked-tropical-hardwood aesthetic. Reserve is the premium-tier composite ($5.50/lf), focused on the multi-tonal natural-variation aesthetic. Both carry the same 30-yr structural + 30-yr fade & stain warranty. The visual difference: Legacy's Tigerwood color is the most realistic tropical-hardwood mimic on the market (deep amber-brown streaking), while Reserve's Antique Leather + Pecan are warm uniform multi-tonals. Pick Legacy when you want the IPE-look at half the IPE price; pick Reserve when you want a uniform premium look.

Embed this calculator

One line. Any site. Free.

Drop the snippet into your contractor site, blog, or marketing page. Theme matches the parent site automatically.

<!-- Timbertech Legacy Calculator — free embed by DeckMath -->
<a href="https://deckmath.com/calculators/timbertech-legacy-calculator"
   data-deckmath-calc="timbertech-legacy-calculator"
   data-theme="auto">Timbertech Legacy Calculator by DeckMath</a>
<script src="https://embed.deckmath.com/v1.js" async></script>

The credit link is a normal attribution — please keep it in. It's how DeckMath stays 100% free, with no signup and no ads inside the widget.

One tool · free · no signup

Plan the whole project, not just one number

The Deck Project Planner turns your dimensions into a complete material list, cost, 3D preview, and a PDF you can take to the lumber yard — all in one place.