TimberTech Deck Cost by State
TimberTech (owned by AZEK Company) makes 3 lines: Edge Prime+ (capped composite entry), Pro Legacy (premium capped composite), and AZEK Vintage/Harvest/Arbor (cellular PVC top tier). PVC lines outperform composite on heat + moisture but cost ~20-30% more. National installed cost runs $42–$105/sqft (median ~$74) — multiply by your state's labor multiplier for local pricing. Use the calculator below for an exact breakdown, then pick your state for frost depth, permit fees, and the local range.
Dimensions
Plan-view length × width.
IRC R312 requires a 36″ guardrail above 30″.
320 sq ft · Mid composite · 1.22× labor · 1.10× complexity
Project advisories · IRC 2021
Guardrail included (deck 36″ off grade)
IRC R312IRC R312 mandates a 36″ guardrail on open edges when deck height exceeds 30″. 52 lf priced at Mid composite tier.
Building permit included in budget
IRC R105Northeast typical permit fee is in the budget. Most jurisdictions require a permit for decks > 200 sqft, > 30″ above grade, or attached to the house.
Hidden-fastener install premium baked in
Manufacturer specsMid composite uses hidden-fastener clip systems (Cortex / CamoClip / Trex Universal) — labor takes 25–30% longer than face-screwing PT. Already inside the tier's installed $/sqft band.
Cost breakdown
| Cost component | Share | Amount |
|---|---|---|
| Materials | 29% | $12,672 |
| Labor | 43% | $18,895 |
| Add-ons | 19% | $8,369 |
| Soft costs | 1% | $389 |
| Contingency | 9% | $4,033 |
| Total (high est.) | 100% | $44,358 |
Share of the high estimate. Switch tiers below to repaint the split.
National-median pricing (2026-Q1). Local prices vary ±15%. Materials line uses Mid composite tier; switch tiers to repaint the budget. Includes 10% contingency reserve on the high estimate.
Visualize your deck
Photoreal 3D · plan view · framing breakdown. Color matches your tier selection.
Project all-in
Same dimensions, different tier
tap to switchDIY savings
- Materials only: $12,672
- Estimated hours: 480 hr
- Skill required: advanced
Finance estimate
- Principal: $44,358
- Total interest: $9,595
- Estimate only — shop 3+ lenders.
Need exact board counts?
The Deck Material Calculator gives you a permit-ready bill of materials — every joist, hanger, fastener, and footing — validated against IRC 2021 span tables.
Estimates use 2026-Q1 national-median pricing (Home Advisor, Angi, RSMeans). Expect ±15% variance vs your local market. Always get 3 contractor bids before signing. This calculator is not a substitute for a licensed inspector or structural engineer.
TimberTech warranty & value
Warranty: 30-yr fade + 50-yr lifetime on AZEK PVC, 30-yr on Edge Prime+, lifetime structural on all lines.
TimberTech installed cost ranges from $42/sqft (Edge Prime+ on PT framing) to $105/sqft (AZEK Harvest on premium railing). The PVC lines (AZEK Vintage Mahogany / AZEK Harvest Slate Gray) command the top of the range — multiply by your state labor multiplier.
TimberTech product lines
TimberTech deck cost by state
Per-square-foot range with each state's labor multiplier applied. Open a state for its frost depth, permit baseline, climate notes, and a calculator pre-set to that market.
South
West
Northeast
Midwest
FAQ — TimberTech deck cost
How much does a TimberTech deck cost in 2026?
TimberTech installed cost ranges from $42/sqft (Edge Prime+ on PT framing) to $105/sqft (AZEK Harvest on premium railing). The PVC lines (AZEK Vintage Mahogany / AZEK Harvest Slate Gray) command the top of the range — multiply by your state labor multiplier. For example, a 16×20 (320 sqft) TimberTech deck runs roughly $13,440–$33,600 installed at the national average, before your state's labor multiplier.
Is TimberTech decking worth the price?
TimberTech carries a 30-yr fade + 50-yr lifetime on azek pvc, 30-yr on edge prime+, lifetime structural on all lines and an expected service life around 32 years. Against pressure-treated pine — which needs staining every 2–3 years and typically replacement by year 15 — the higher upfront cost usually wins on 25-year total cost of ownership.
Which TimberTech line should I choose?
TimberTech Edge Prime+ (Entry capped composite, ~$42/sqft); TimberTech Pro Legacy (Premium composite, ~$58/sqft); TimberTech AZEK Vintage (Premium PVC, ~$72/sqft); TimberTech AZEK Harvest (Luxury PVC, ~$88/sqft). Entry lines suit budget builds and resale-neutral projects; premium and PVC lines pay off where heat, moisture, or a 30-to-50-year warranty matter most.
Why does TimberTech deck cost vary by state?
Material price is roughly national-average since TimberTech ships from regional distribution centers. The cost swing between states is almost entirely labor: from about 0.92× the national average in low-cost regions to 1.28× in high-cost coastal markets. Pick your state below to apply the local multiplier.