Composite Deck Cost in Minnesota
A Composite deck in Minnesota costs $35-$95/sqft installed with the state's 1.00× labor multiplier (Midwest). Generic composite covers the entire wood-plastic-composite + capped composite + PVC market — Trex, TimberTech, Fiberon, Deckorators, MoistureShield, Wolf, Zuri, NewTechWood, DuraLife. Average 25-yr lifespan + no maintenance is the value vs PT pine which needs annual staining. Minnesota's frost depth ties Maine for deepest in the contiguous US. Footings dominate the foundation budget.
Composite cost by deck size in Minnesota
Mid-tier Composite (TimberTech Pro Legacy) at Minnesota's 1.00× labor multiplier — ~$58/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($175 baseline + 1.2% of project value), demolition (if replacing), and footings for 60″ frost depth.
Composite product lines in Minnesota
Composite installed cost ranges from $35/sqft (entry tier like Trex Enhance Basics) to $95/sqft (luxury PVC like AZEK Harvest). National median is $50-58/sqft for a mid-tier 2026-Q1 build — multiply by your state labor multiplier for local pricing.
Minnesota-specific notes
Get a precise Composite quote for Minnesota
Open the Composite Deck Calculator with MN pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Composite in Minnesota
How much does a Composite deck cost in Minnesota?▾
In Minnesota, Composite decking costs $35-$95/sqft installed (national $35-$95/sqft × Minnesota's 1.00× labor multiplier). A typical 16×20 (320 sqft) Composite deck lands around $20,800. Mid-tier TimberTech Pro Legacy runs about $18,560 for the same scope.
Which Composite line is best for Minnesota's climate?▾
Minnesota's freeze-thaw cycles favor PVC over composite where budget allows. Fiberon Sanctuary works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a Composite deck in Minnesota?▾
Minnesota permit fees typically run $131-$324 depending on jurisdiction and project value — most calculators use max(regional baseline $175, 1.2% of project value). MN permits $180-320. Frost depth 60″ in the Twin Cities.
How deep do footings need to be for a Composite deck in Minnesota?▾
Minnesota's frost depth is approximately 60″. Composite doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 12-14″ to handle the deep footings. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Composite worth the money in Minnesota?▾
Composite vs PT pine over 25 years in Minnesota: PT pine = ~$30/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $93/sqft total. Composite mid-tier = $58/sqft installed + $0 maintenance = $58/sqft total. Composite typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.