Herringbone 20×18 Deck Cost
A herringbone board pattern on a 20×18 (360 sqft) deck costs $23,040-$36,720 in mid-tier composite — 28% over straight. Boards laid in alternating 90° pairs forming an interlocking pattern. Highly visual — used on showcase decks and premium builds.
5 finish tiers — herringbone 20×18
National $/sqft × herringbone pattern's 1.28× complexity × 360 sqft = total installed cost. 18% waste factor already applied to the material side. Multiply by your state's labor multiplier for a local figure.
What changes vs a straight 20×18
When to pick herringbone
Premium builds, decks visible from upper floors, owners wanting a single dramatic design choice. Pairs especially well with two-tone composite.
Doubled framing labor + complex install pattern + 18% waste means total cost is typically 35-45% above straight. Not DIY-friendly without prior carpentry experience.
See this pattern in 3D before you commit
The Pattern Visualizer animation renders all 5 patterns live so you can rotate and compare. Useful for spousal sign-off and contractor conversations.
FAQ — herringbone 20×18
How much does a herringbone 20×18 deck cost in 2026?▾
A herringbone pattern on a 20×18 (360 sqft) deck costs $11,520-$18,360 in pressure-treated, $23,040-$36,720 in mid-tier composite, $34,560-$50,760 in luxury composite/PVC. That's 28% over straight-pattern baseline — about $6,480 extra at mid composite.
What's the waste factor on a herringbone pattern?▾
18% — vs 7% for straight boards. On a 20×18 deck that means ordering 660 linear feet of decking (vs 594 for straight). The extra 66 lf is the difference between order quantity and installed quantity, ending up as offcuts and short pieces.
Does a herringbone pattern affect joist spacing?▾
Yes — primary 16″ o.c. + sub-joist sleepers at 12″ o.c. across. The denser joist spacing supports the pattern visually and structurally. Plan ~30-40% more joists than a straight install would require, plus the matching extra hangers + footings if framing spans need to shorten.
Will my deck warranty cover herringbone?▾
Herringbone requires sleeper/sub-joist framing (a secondary joist layer at 90° to primary). Most composite brands have specialty install instructions; not all warranty-eligible. Trex Signature and TimberTech AZEK explicitly support herringbone.
Is herringbone the right pattern for a 20×18 deck?▾
Best for: Premium builds, decks visible from upper floors, owners wanting a single dramatic design choice. Pairs especially well with two-tone composite. Watch-outs: Doubled framing labor + complex install pattern + 18% waste means total cost is typically 35-45% above straight. Not DIY-friendly without prior carpentry experience. At 360 sqft, herringbone is well-balanced — fits the typical sweet spot for this pattern.