Fiberon Deck Cost in Utah
A Fiberon deck in Utah costs $49-$122/sqft installed with the state's 1.28× labor multiplier (West). Fiberon (Fortune Brands company) makes 3 main lines: Paramount (entry PVC), Promenade (mid composite), Sanctuary (premium capped composite). Strong value across all tiers — typically prices 5-10% under Trex equivalents. Utah labor 1.28× national. Frost depth 30-36″.
Fiberon cost by deck size in Utah
Mid-tier Fiberon (Fiberon Promenade) at Utah's 1.28× labor multiplier — ~$61/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($290 baseline + 1.2% of project value), demolition (if replacing), and footings for 30″ frost depth.
Fiberon product lines in Utah
Fiberon installed cost ranges from $38/sqft (Paramount on PT framing) to $95/sqft (Sanctuary Cinnabar on premium railing). Sanctuary is the highest-rated composite in independent durability tests — multiply by your state labor multiplier.
Utah-specific notes
Get a precise Fiberon quote for Utah
Open the Fiberon Deck Calculator with UT pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Fiberon in Utah
How much does a Fiberon deck cost in Utah?▾
In Utah, Fiberon decking costs $49-$122/sqft installed (national $38-$95/sqft × Utah's 1.28× labor multiplier). A typical 16×20 (320 sqft) Fiberon deck lands around $27,200. Mid-tier Fiberon Promenade runs about $19,520 for the same scope.
Which Fiberon line is best for Utah's climate?▾
Utah's freeze-thaw cycles favor PVC over composite where budget allows. Fiberon Sanctuary works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a Fiberon deck in Utah?▾
Utah permit fees typically run $218-$537 depending on jurisdiction and project value — most calculators use max(regional baseline $290, 1.2% of project value). UT permits $180-300.
How deep do footings need to be for a Fiberon deck in Utah?▾
Utah's frost depth is approximately 30″. Fiberon doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10-12″ depending on tributary area. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Fiberon worth the money in Utah?▾
Fiberon vs PT pine over 25 years in Utah: PT pine = ~$38/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $118/sqft total. Fiberon mid-tier = $61/sqft installed + $0 maintenance = $61/sqft total. Fiberon typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.