Fiberon Deck Cost in Texas
A Fiberon deck in Texas costs $35-$87/sqft installed with the state's 0.92× labor multiplier (South). Fiberon (Fortune Brands company) makes 3 main lines: Paramount (entry PVC), Promenade (mid composite), Sanctuary (premium capped composite). Strong value across all tiers — typically prices 5-10% under Trex equivalents. Texas labor 0.92× national. Houston + Galveston salt-air drives PVC + 316SS.
Fiberon cost by deck size in Texas
Mid-tier Fiberon (Fiberon Promenade) at Texas's 0.92× labor multiplier — ~$44/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($140 baseline + 1.2% of project value), demolition (if replacing), and footings for 6″ frost depth.
Fiberon product lines in Texas
Fiberon installed cost ranges from $38/sqft (Paramount on PT framing) to $95/sqft (Sanctuary Cinnabar on premium railing). Sanctuary is the highest-rated composite in independent durability tests — multiply by your state labor multiplier.
Texas-specific notes
Get a precise Fiberon quote for Texas
Open the Fiberon Deck Calculator with TX pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Fiberon in Texas
How much does a Fiberon deck cost in Texas?▾
In Texas, Fiberon decking costs $35-$87/sqft installed (national $38-$95/sqft × Texas's 0.92× labor multiplier). A typical 16×20 (320 sqft) Fiberon deck lands around $19,520. Mid-tier Fiberon Promenade runs about $14,080 for the same scope.
Which Fiberon line is best for Texas's climate?▾
Texas's humid climate favors capped composite or PVC over generic composite — Fiberon Sanctuary performs best in this environment. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a Fiberon deck in Texas?▾
Texas permit fees typically run $105-$259 depending on jurisdiction and project value — most calculators use max(regional baseline $140, 1.2% of project value). TX permits $150-280. Houston coastal uplift requirements.
How deep do footings need to be for a Fiberon deck in Texas?▾
Texas's frost depth is approximately 6″. Fiberon doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10″ for typical loads. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Fiberon worth the money in Texas?▾
Fiberon vs PT pine over 25 years in Texas: PT pine = ~$28/sqft installed + ~$2/sqft/yr maintenance (stain/seal annually) = $85/sqft total. Fiberon mid-tier = $44/sqft installed + $0 maintenance = $44/sqft total. Fiberon typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Fiberon deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.