Composite Deck Cost in New Hampshire
A Composite deck in New Hampshire costs $43-$116/sqft installed with the state's 1.22× labor multiplier (Northeast). Generic composite covers the entire wood-plastic-composite + capped composite + PVC market — Trex, TimberTech, Fiberon, Deckorators, MoistureShield, Wolf, Zuri, NewTechWood, DuraLife. Average 25-yr lifespan + no maintenance is the value vs PT pine which needs annual staining. New Hampshire labor 1.22× national. Frost depth 48″.
Composite cost by deck size in New Hampshire
Mid-tier Composite (TimberTech Pro Legacy) at New Hampshire's 1.22× labor multiplier — ~$71/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($320 baseline + 1.2% of project value), demolition (if replacing), and footings for 48″ frost depth.
Composite product lines in New Hampshire
Composite installed cost ranges from $35/sqft (entry tier like Trex Enhance Basics) to $95/sqft (luxury PVC like AZEK Harvest). National median is $50-58/sqft for a mid-tier 2026-Q1 build — multiply by your state labor multiplier for local pricing.
New Hampshire-specific notes
Get a precise Composite quote for New Hampshire
Open the Composite Deck Calculator with NH pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Composite in New Hampshire
How much does a Composite deck cost in New Hampshire?▾
In New Hampshire, Composite decking costs $43-$116/sqft installed (national $35-$95/sqft × New Hampshire's 1.22× labor multiplier). A typical 16×20 (320 sqft) Composite deck lands around $25,280. Mid-tier TimberTech Pro Legacy runs about $22,720 for the same scope.
Which Composite line is best for New Hampshire's climate?▾
New Hampshire's freeze-thaw cycles favor PVC over composite where budget allows. Fiberon Sanctuary works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a Composite deck in New Hampshire?▾
New Hampshire permit fees typically run $240-$592 depending on jurisdiction and project value — most calculators use max(regional baseline $320, 1.2% of project value). NH permits $200-340.
How deep do footings need to be for a Composite deck in New Hampshire?▾
New Hampshire's frost depth is approximately 48″. Composite doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 12-14″ to handle the deep footings. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Composite worth the money in New Hampshire?▾
Composite vs PT pine over 25 years in New Hampshire: PT pine = ~$37/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $113/sqft total. Composite mid-tier = $71/sqft installed + $0 maintenance = $71/sqft total. Composite typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Composite deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.