Composite Deck Cost in Georgia
A Composite deck in Georgia costs $32-$87/sqft installed with the state's 0.92× labor multiplier (South). Generic composite covers the entire wood-plastic-composite + capped composite + PVC market — Trex, TimberTech, Fiberon, Deckorators, MoistureShield, Wolf, Zuri, NewTechWood, DuraLife. Average 25-yr lifespan + no maintenance is the value vs PT pine which needs annual staining. Georgia labor 0.92× national. Humid summers — composite > PT for 25-yr TCO.
Composite cost by deck size in Georgia
Mid-tier Composite (TimberTech Pro Legacy) at Georgia's 0.92× labor multiplier — ~$53/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($140 baseline + 1.2% of project value), demolition (if replacing), and footings for 6″ frost depth.
Composite product lines in Georgia
Composite installed cost ranges from $35/sqft (entry tier like Trex Enhance Basics) to $95/sqft (luxury PVC like AZEK Harvest). National median is $50-58/sqft for a mid-tier 2026-Q1 build — multiply by your state labor multiplier for local pricing.
Georgia-specific notes
Get a precise Composite quote for Georgia
Open the Composite Deck Calculator with GA pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Composite in Georgia
How much does a Composite deck cost in Georgia?▾
In Georgia, Composite decking costs $32-$87/sqft installed (national $35-$95/sqft × Georgia's 0.92× labor multiplier). A typical 16×20 (320 sqft) Composite deck lands around $19,200. Mid-tier TimberTech Pro Legacy runs about $16,960 for the same scope.
Which Composite line is best for Georgia's climate?▾
Georgia's humid climate favors capped composite or PVC over generic composite — Fiberon Sanctuary performs best in this environment. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a Composite deck in Georgia?▾
Georgia permit fees typically run $105-$259 depending on jurisdiction and project value — most calculators use max(regional baseline $140, 1.2% of project value). GA permits $120-220. Atlanta metro stricter than rural counties.
How deep do footings need to be for a Composite deck in Georgia?▾
Georgia's frost depth is approximately 6″. Composite doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10″ for typical loads. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Composite worth the money in Georgia?▾
Composite vs PT pine over 25 years in Georgia: PT pine = ~$28/sqft installed + ~$2/sqft/yr maintenance (stain/seal annually) = $85/sqft total. Composite mid-tier = $53/sqft installed + $0 maintenance = $53/sqft total. Composite typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.