Composite Deck Cost in Texas
A Composite deck in Texas costs $32-$87/sqft installed with the state's 0.92× labor multiplier (South). Generic composite covers the entire wood-plastic-composite + capped composite + PVC market — Trex, TimberTech, Fiberon, Deckorators, MoistureShield, Wolf, Zuri, NewTechWood, DuraLife. Average 25-yr lifespan + no maintenance is the value vs PT pine which needs annual staining. Texas labor 0.92× national. Houston + Galveston salt-air drives PVC + 316SS.
Composite cost by deck size in Texas
Mid-tier Composite (TimberTech Pro Legacy) at Texas's 0.92× labor multiplier — ~$53/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($140 baseline + 1.2% of project value), demolition (if replacing), and footings for 6″ frost depth.
Composite product lines in Texas
Composite installed cost ranges from $35/sqft (entry tier like Trex Enhance Basics) to $95/sqft (luxury PVC like AZEK Harvest). National median is $50-58/sqft for a mid-tier 2026-Q1 build — multiply by your state labor multiplier for local pricing.
Texas-specific notes
Get a precise Composite quote for Texas
Open the Composite Deck Calculator with TX pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Composite in Texas
How much does a Composite deck cost in Texas?▾
In Texas, Composite decking costs $32-$87/sqft installed (national $35-$95/sqft × Texas's 0.92× labor multiplier). A typical 16×20 (320 sqft) Composite deck lands around $19,200. Mid-tier TimberTech Pro Legacy runs about $16,960 for the same scope.
Which Composite line is best for Texas's climate?▾
Texas's humid climate favors capped composite or PVC over generic composite — Fiberon Sanctuary performs best in this environment. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a Composite deck in Texas?▾
Texas permit fees typically run $105-$259 depending on jurisdiction and project value — most calculators use max(regional baseline $140, 1.2% of project value). TX permits $150-280. Houston coastal uplift requirements.
How deep do footings need to be for a Composite deck in Texas?▾
Texas's frost depth is approximately 6″. Composite doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10″ for typical loads. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Composite worth the money in Texas?▾
Composite vs PT pine over 25 years in Texas: PT pine = ~$28/sqft installed + ~$2/sqft/yr maintenance (stain/seal annually) = $85/sqft total. Composite mid-tier = $53/sqft installed + $0 maintenance = $53/sqft total. Composite typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Composite deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.