Trex Deck Cost in South Carolina
A Trex deck in South Carolina costs $35-$87/sqft installed with the state's 0.92× labor multiplier (South). Trex is the largest composite decking brand in North America with ~35% market share. 3 main lines compete on price-vs-performance: Enhance (entry), Transcend (premium), Signature (luxury heat-mitigation cap). South Carolina labor 0.92× national. Charleston-area salt-air — 316SS hardware.
Trex cost by deck size in South Carolina
Mid-tier Trex (Trex Enhance Basics) at South Carolina's 0.92× labor multiplier — ~$32/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($140 baseline + 1.2% of project value), demolition (if replacing), and footings for 6″ frost depth.
Trex product lines in South Carolina
Trex installed cost ranges from $38/sqft (Enhance Naturals on PT framing) to $95/sqft (Signature on engineered framing + premium railing). National median is $52/sqft for a mid-tier Transcend deck — multiply by your state labor multiplier for local pricing.
South Carolina-specific notes
Get a precise Trex quote for South Carolina
Open the Trex Deck Calculator with SC pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Trex in South Carolina
How much does a Trex deck cost in South Carolina?▾
In South Carolina, Trex decking costs $35-$87/sqft installed (national $38-$95/sqft × South Carolina's 0.92× labor multiplier). A typical 16×20 (320 sqft) Trex deck lands around $19,520. Mid-tier Trex Enhance Basics runs about $10,240 for the same scope.
Which Trex line is best for South Carolina's climate?▾
South Carolina's humid climate favors capped composite or PVC over generic composite — Trex Transcend performs best in this environment. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a Trex deck in South Carolina?▾
South Carolina permit fees typically run $105-$259 depending on jurisdiction and project value — most calculators use max(regional baseline $140, 1.2% of project value). SC permits $130-220. Coastal counties hurricane uplift.
How deep do footings need to be for a Trex deck in South Carolina?▾
South Carolina's frost depth is approximately 6″. Trex doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10″ for typical loads. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Trex worth the money in South Carolina?▾
Trex vs PT pine over 25 years in South Carolina: PT pine = ~$28/sqft installed + ~$2/sqft/yr maintenance (stain/seal annually) = $85/sqft total. Trex mid-tier = $32/sqft installed + $0 maintenance = $32/sqft total. Trex typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.