Trex Deck Cost in Texas
A Trex deck in Texas costs $35-$87/sqft installed with the state's 0.92× labor multiplier (South). Trex is the largest composite decking brand in North America with ~35% market share. 3 main lines compete on price-vs-performance: Enhance (entry), Transcend (premium), Signature (luxury heat-mitigation cap). Texas labor 0.92× national. Houston + Galveston salt-air drives PVC + 316SS.
Trex cost by deck size in Texas
Mid-tier Trex (Trex Enhance Basics) at Texas's 0.92× labor multiplier — ~$32/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($140 baseline + 1.2% of project value), demolition (if replacing), and footings for 6″ frost depth.
Trex product lines in Texas
Trex installed cost ranges from $38/sqft (Enhance Naturals on PT framing) to $95/sqft (Signature on engineered framing + premium railing). National median is $52/sqft for a mid-tier Transcend deck — multiply by your state labor multiplier for local pricing.
Texas-specific notes
Get a precise Trex quote for Texas
Open the Trex Deck Calculator with TX pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Trex in Texas
How much does a Trex deck cost in Texas?▾
In Texas, Trex decking costs $35-$87/sqft installed (national $38-$95/sqft × Texas's 0.92× labor multiplier). A typical 16×20 (320 sqft) Trex deck lands around $19,520. Mid-tier Trex Enhance Basics runs about $10,240 for the same scope.
Which Trex line is best for Texas's climate?▾
Texas's humid climate favors capped composite or PVC over generic composite — Trex Transcend performs best in this environment. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a Trex deck in Texas?▾
Texas permit fees typically run $105-$259 depending on jurisdiction and project value — most calculators use max(regional baseline $140, 1.2% of project value). TX permits $150-280. Houston coastal uplift requirements.
How deep do footings need to be for a Trex deck in Texas?▾
Texas's frost depth is approximately 6″. Trex doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10″ for typical loads. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Trex worth the money in Texas?▾
Trex vs PT pine over 25 years in Texas: PT pine = ~$28/sqft installed + ~$2/sqft/yr maintenance (stain/seal annually) = $85/sqft total. Trex mid-tier = $32/sqft installed + $0 maintenance = $32/sqft total. Trex typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Trex deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.