Trex Deck Cost in Idaho
A Trex deck in Idaho costs $49-$122/sqft installed with the state's 1.28× labor multiplier (West). Trex is the largest composite decking brand in North America with ~35% market share. 3 main lines compete on price-vs-performance: Enhance (entry), Transcend (premium), Signature (luxury heat-mitigation cap). Idaho labor 1.28× national, but materials roughly national average — labor is the variance driver.
Trex cost by deck size in Idaho
Mid-tier Trex (Trex Enhance Basics) at Idaho's 1.28× labor multiplier — ~$45/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($290 baseline + 1.2% of project value), demolition (if replacing), and footings for 36″ frost depth.
Trex product lines in Idaho
Trex installed cost ranges from $38/sqft (Enhance Naturals on PT framing) to $95/sqft (Signature on engineered framing + premium railing). National median is $52/sqft for a mid-tier Transcend deck — multiply by your state labor multiplier for local pricing.
Idaho-specific notes
Get a precise Trex quote for Idaho
Open the Trex Deck Calculator with ID pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Trex in Idaho
How much does a Trex deck cost in Idaho?▾
In Idaho, Trex decking costs $49-$122/sqft installed (national $38-$95/sqft × Idaho's 1.28× labor multiplier). A typical 16×20 (320 sqft) Trex deck lands around $27,200. Mid-tier Trex Enhance Basics runs about $14,400 for the same scope.
Which Trex line is best for Idaho's climate?▾
Idaho's freeze-thaw cycles favor PVC over composite where budget allows. Trex Transcend works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a Trex deck in Idaho?▾
Idaho permit fees typically run $218-$537 depending on jurisdiction and project value — most calculators use max(regional baseline $290, 1.2% of project value). ID permits $150-280. Frost depth 36-42″ across most of the state.
How deep do footings need to be for a Trex deck in Idaho?▾
Idaho's frost depth is approximately 36″. Trex doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10-12″ depending on tributary area. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Trex worth the money in Idaho?▾
Trex vs PT pine over 25 years in Idaho: PT pine = ~$38/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $118/sqft total. Trex mid-tier = $45/sqft installed + $0 maintenance = $45/sqft total. Trex typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.