Trex Deck Cost in District of Columbia
A Trex deck in District of Columbia costs $35-$87/sqft installed with the state's 0.92× labor multiplier (South). Trex is the largest composite decking brand in North America with ~35% market share. 3 main lines compete on price-vs-performance: Enhance (entry), Transcend (premium), Signature (luxury heat-mitigation cap). Washington DC labor 0.92× national, but proximity to NoVA + MD suburbs (which are also S region) keeps quotes competitive.
Trex cost by deck size in District of Columbia
Mid-tier Trex (Trex Enhance Basics) at District of Columbia's 0.92× labor multiplier — ~$32/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($140 baseline + 1.2% of project value), demolition (if replacing), and footings for 30″ frost depth.
Trex product lines in District of Columbia
Trex installed cost ranges from $38/sqft (Enhance Naturals on PT framing) to $95/sqft (Signature on engineered framing + premium railing). National median is $52/sqft for a mid-tier Transcend deck — multiply by your state labor multiplier for local pricing.
District of Columbia-specific notes
Get a precise Trex quote for District of Columbia
Open the Trex Deck Calculator with DC pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Trex in District of Columbia
How much does a Trex deck cost in District of Columbia?▾
In District of Columbia, Trex decking costs $35-$87/sqft installed (national $38-$95/sqft × District of Columbia's 0.92× labor multiplier). A typical 16×20 (320 sqft) Trex deck lands around $19,520. Mid-tier Trex Enhance Basics runs about $10,240 for the same scope.
Which Trex line is best for District of Columbia's climate?▾
District of Columbia's humid climate favors capped composite or PVC over generic composite — Trex Transcend performs best in this environment. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a Trex deck in District of Columbia?▾
District of Columbia permit fees typically run $105-$259 depending on jurisdiction and project value — most calculators use max(regional baseline $140, 1.2% of project value). DC permits $250-450. Strict historic-district review in some neighborhoods.
How deep do footings need to be for a Trex deck in District of Columbia?▾
District of Columbia's frost depth is approximately 30″. Trex doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10-12″ depending on tributary area. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Trex worth the money in District of Columbia?▾
Trex vs PT pine over 25 years in District of Columbia: PT pine = ~$28/sqft installed + ~$2/sqft/yr maintenance (stain/seal annually) = $85/sqft total. Trex mid-tier = $32/sqft installed + $0 maintenance = $32/sqft total. Trex typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Trex deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.