Fiberon Deck Cost in Vermont
A Fiberon deck in Vermont costs $46-$116/sqft installed with the state's 1.22× labor multiplier (Northeast). Fiberon (Fortune Brands company) makes 3 main lines: Paramount (entry PVC), Promenade (mid composite), Sanctuary (premium capped composite). Strong value across all tiers — typically prices 5-10% under Trex equivalents. Vermont's frost depth ties for deepest in the US. Footings dominate the budget. Labor 1.22× national.
Fiberon cost by deck size in Vermont
Mid-tier Fiberon (Fiberon Promenade) at Vermont's 1.22× labor multiplier — ~$59/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($320 baseline + 1.2% of project value), demolition (if replacing), and footings for 60″ frost depth.
Fiberon product lines in Vermont
Fiberon installed cost ranges from $38/sqft (Paramount on PT framing) to $95/sqft (Sanctuary Cinnabar on premium railing). Sanctuary is the highest-rated composite in independent durability tests — multiply by your state labor multiplier.
Vermont-specific notes
Get a precise Fiberon quote for Vermont
Open the Fiberon Deck Calculator with VT pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Fiberon in Vermont
How much does a Fiberon deck cost in Vermont?▾
In Vermont, Fiberon decking costs $46-$116/sqft installed (national $38-$95/sqft × Vermont's 1.22× labor multiplier). A typical 16×20 (320 sqft) Fiberon deck lands around $25,920. Mid-tier Fiberon Promenade runs about $18,880 for the same scope.
Which Fiberon line is best for Vermont's climate?▾
Vermont's freeze-thaw cycles favor PVC over composite where budget allows. Fiberon Sanctuary works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a Fiberon deck in Vermont?▾
Vermont permit fees typically run $240-$592 depending on jurisdiction and project value — most calculators use max(regional baseline $320, 1.2% of project value). VT permits $200-340. Frost depth 60″ in northern VT.
How deep do footings need to be for a Fiberon deck in Vermont?▾
Vermont's frost depth is approximately 60″. Fiberon doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 12-14″ to handle the deep footings. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Fiberon worth the money in Vermont?▾
Fiberon vs PT pine over 25 years in Vermont: PT pine = ~$37/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $113/sqft total. Fiberon mid-tier = $59/sqft installed + $0 maintenance = $59/sqft total. Fiberon typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.