Fiberon Deck Cost in South Carolina
A Fiberon deck in South Carolina costs $35-$87/sqft installed with the state's 0.92× labor multiplier (South). Fiberon (Fortune Brands company) makes 3 main lines: Paramount (entry PVC), Promenade (mid composite), Sanctuary (premium capped composite). Strong value across all tiers — typically prices 5-10% under Trex equivalents. South Carolina labor 0.92× national. Charleston-area salt-air — 316SS hardware.
Fiberon cost by deck size in South Carolina
Mid-tier Fiberon (Fiberon Promenade) at South Carolina's 0.92× labor multiplier — ~$44/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($140 baseline + 1.2% of project value), demolition (if replacing), and footings for 6″ frost depth.
Fiberon product lines in South Carolina
Fiberon installed cost ranges from $38/sqft (Paramount on PT framing) to $95/sqft (Sanctuary Cinnabar on premium railing). Sanctuary is the highest-rated composite in independent durability tests — multiply by your state labor multiplier.
South Carolina-specific notes
Get a precise Fiberon quote for South Carolina
Open the Fiberon Deck Calculator with SC pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Fiberon in South Carolina
How much does a Fiberon deck cost in South Carolina?▾
In South Carolina, Fiberon decking costs $35-$87/sqft installed (national $38-$95/sqft × South Carolina's 0.92× labor multiplier). A typical 16×20 (320 sqft) Fiberon deck lands around $19,520. Mid-tier Fiberon Promenade runs about $14,080 for the same scope.
Which Fiberon line is best for South Carolina's climate?▾
South Carolina's humid climate favors capped composite or PVC over generic composite — Fiberon Sanctuary performs best in this environment. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a Fiberon deck in South Carolina?▾
South Carolina permit fees typically run $105-$259 depending on jurisdiction and project value — most calculators use max(regional baseline $140, 1.2% of project value). SC permits $130-220. Coastal counties hurricane uplift.
How deep do footings need to be for a Fiberon deck in South Carolina?▾
South Carolina's frost depth is approximately 6″. Fiberon doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10″ for typical loads. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Fiberon worth the money in South Carolina?▾
Fiberon vs PT pine over 25 years in South Carolina: PT pine = ~$28/sqft installed + ~$2/sqft/yr maintenance (stain/seal annually) = $85/sqft total. Fiberon mid-tier = $44/sqft installed + $0 maintenance = $44/sqft total. Fiberon typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Fiberon deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.