Fiberon Deck Cost in Rhode Island
A Fiberon deck in Rhode Island costs $46-$116/sqft installed with the state's 1.22× labor multiplier (Northeast). Fiberon (Fortune Brands company) makes 3 main lines: Paramount (entry PVC), Promenade (mid composite), Sanctuary (premium capped composite). Strong value across all tiers — typically prices 5-10% under Trex equivalents. Rhode Island labor 1.22× national.
Fiberon cost by deck size in Rhode Island
Mid-tier Fiberon (Fiberon Promenade) at Rhode Island's 1.22× labor multiplier — ~$59/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($320 baseline + 1.2% of project value), demolition (if replacing), and footings for 42″ frost depth.
Fiberon product lines in Rhode Island
Fiberon installed cost ranges from $38/sqft (Paramount on PT framing) to $95/sqft (Sanctuary Cinnabar on premium railing). Sanctuary is the highest-rated composite in independent durability tests — multiply by your state labor multiplier.
Rhode Island-specific notes
Get a precise Fiberon quote for Rhode Island
Open the Fiberon Deck Calculator with RI pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Fiberon in Rhode Island
How much does a Fiberon deck cost in Rhode Island?▾
In Rhode Island, Fiberon decking costs $46-$116/sqft installed (national $38-$95/sqft × Rhode Island's 1.22× labor multiplier). A typical 16×20 (320 sqft) Fiberon deck lands around $25,920. Mid-tier Fiberon Promenade runs about $18,880 for the same scope.
Which Fiberon line is best for Rhode Island's climate?▾
Rhode Island's freeze-thaw cycles favor PVC over composite where budget allows. Fiberon Sanctuary works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a Fiberon deck in Rhode Island?▾
Rhode Island permit fees typically run $240-$592 depending on jurisdiction and project value — most calculators use max(regional baseline $320, 1.2% of project value). RI permits $200-340.
How deep do footings need to be for a Fiberon deck in Rhode Island?▾
Rhode Island's frost depth is approximately 42″. Fiberon doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10-12″ depending on tributary area. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Fiberon worth the money in Rhode Island?▾
Fiberon vs PT pine over 25 years in Rhode Island: PT pine = ~$37/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $113/sqft total. Fiberon mid-tier = $59/sqft installed + $0 maintenance = $59/sqft total. Fiberon typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Fiberon deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.