Fiberon Deck Cost in New Hampshire
A Fiberon deck in New Hampshire costs $46-$116/sqft installed with the state's 1.22× labor multiplier (Northeast). Fiberon (Fortune Brands company) makes 3 main lines: Paramount (entry PVC), Promenade (mid composite), Sanctuary (premium capped composite). Strong value across all tiers — typically prices 5-10% under Trex equivalents. New Hampshire labor 1.22× national. Frost depth 48″.
Fiberon cost by deck size in New Hampshire
Mid-tier Fiberon (Fiberon Promenade) at New Hampshire's 1.22× labor multiplier — ~$59/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($320 baseline + 1.2% of project value), demolition (if replacing), and footings for 48″ frost depth.
Fiberon product lines in New Hampshire
Fiberon installed cost ranges from $38/sqft (Paramount on PT framing) to $95/sqft (Sanctuary Cinnabar on premium railing). Sanctuary is the highest-rated composite in independent durability tests — multiply by your state labor multiplier.
New Hampshire-specific notes
Get a precise Fiberon quote for New Hampshire
Open the Fiberon Deck Calculator with NH pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Fiberon in New Hampshire
How much does a Fiberon deck cost in New Hampshire?▾
In New Hampshire, Fiberon decking costs $46-$116/sqft installed (national $38-$95/sqft × New Hampshire's 1.22× labor multiplier). A typical 16×20 (320 sqft) Fiberon deck lands around $25,920. Mid-tier Fiberon Promenade runs about $18,880 for the same scope.
Which Fiberon line is best for New Hampshire's climate?▾
New Hampshire's freeze-thaw cycles favor PVC over composite where budget allows. Fiberon Sanctuary works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a Fiberon deck in New Hampshire?▾
New Hampshire permit fees typically run $240-$592 depending on jurisdiction and project value — most calculators use max(regional baseline $320, 1.2% of project value). NH permits $200-340.
How deep do footings need to be for a Fiberon deck in New Hampshire?▾
New Hampshire's frost depth is approximately 48″. Fiberon doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 12-14″ to handle the deep footings. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Fiberon worth the money in New Hampshire?▾
Fiberon vs PT pine over 25 years in New Hampshire: PT pine = ~$37/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $113/sqft total. Fiberon mid-tier = $59/sqft installed + $0 maintenance = $59/sqft total. Fiberon typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Fiberon deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.