Fiberon Deck Cost in Missouri
A Fiberon deck in Missouri costs $38-$95/sqft installed with the state's 1.00× labor multiplier (Midwest). Fiberon (Fortune Brands company) makes 3 main lines: Paramount (entry PVC), Promenade (mid composite), Sanctuary (premium capped composite). Strong value across all tiers — typically prices 5-10% under Trex equivalents. Missouri labor 1.00× national. Mid-spectrum frost depth 24-30″.
Fiberon cost by deck size in Missouri
Mid-tier Fiberon (Fiberon Promenade) at Missouri's 1.00× labor multiplier — ~$48/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($175 baseline + 1.2% of project value), demolition (if replacing), and footings for 24″ frost depth.
Fiberon product lines in Missouri
Fiberon installed cost ranges from $38/sqft (Paramount on PT framing) to $95/sqft (Sanctuary Cinnabar on premium railing). Sanctuary is the highest-rated composite in independent durability tests — multiply by your state labor multiplier.
Missouri-specific notes
Get a precise Fiberon quote for Missouri
Open the Fiberon Deck Calculator with MO pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Fiberon in Missouri
How much does a Fiberon deck cost in Missouri?▾
In Missouri, Fiberon decking costs $38-$95/sqft installed (national $38-$95/sqft × Missouri's 1.00× labor multiplier). A typical 16×20 (320 sqft) Fiberon deck lands around $21,440. Mid-tier Fiberon Promenade runs about $15,360 for the same scope.
Which Fiberon line is best for Missouri's climate?▾
Missouri's humid climate favors capped composite or PVC over generic composite — Fiberon Sanctuary performs best in this environment. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a Fiberon deck in Missouri?▾
Missouri permit fees typically run $131-$324 depending on jurisdiction and project value — most calculators use max(regional baseline $175, 1.2% of project value). MO permits $130-220.
How deep do footings need to be for a Fiberon deck in Missouri?▾
Missouri's frost depth is approximately 24″. Fiberon doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10-12″ depending on tributary area. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Fiberon worth the money in Missouri?▾
Fiberon vs PT pine over 25 years in Missouri: PT pine = ~$30/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $93/sqft total. Fiberon mid-tier = $48/sqft installed + $0 maintenance = $48/sqft total. Fiberon typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Fiberon deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.