Fiberon Deck Cost in Idaho
A Fiberon deck in Idaho costs $49-$122/sqft installed with the state's 1.28× labor multiplier (West). Fiberon (Fortune Brands company) makes 3 main lines: Paramount (entry PVC), Promenade (mid composite), Sanctuary (premium capped composite). Strong value across all tiers — typically prices 5-10% under Trex equivalents. Idaho labor 1.28× national, but materials roughly national average — labor is the variance driver.
Fiberon cost by deck size in Idaho
Mid-tier Fiberon (Fiberon Promenade) at Idaho's 1.28× labor multiplier — ~$61/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($290 baseline + 1.2% of project value), demolition (if replacing), and footings for 36″ frost depth.
Fiberon product lines in Idaho
Fiberon installed cost ranges from $38/sqft (Paramount on PT framing) to $95/sqft (Sanctuary Cinnabar on premium railing). Sanctuary is the highest-rated composite in independent durability tests — multiply by your state labor multiplier.
Idaho-specific notes
Get a precise Fiberon quote for Idaho
Open the Fiberon Deck Calculator with ID pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Fiberon in Idaho
How much does a Fiberon deck cost in Idaho?▾
In Idaho, Fiberon decking costs $49-$122/sqft installed (national $38-$95/sqft × Idaho's 1.28× labor multiplier). A typical 16×20 (320 sqft) Fiberon deck lands around $27,200. Mid-tier Fiberon Promenade runs about $19,520 for the same scope.
Which Fiberon line is best for Idaho's climate?▾
Idaho's freeze-thaw cycles favor PVC over composite where budget allows. Fiberon Sanctuary works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a Fiberon deck in Idaho?▾
Idaho permit fees typically run $218-$537 depending on jurisdiction and project value — most calculators use max(regional baseline $290, 1.2% of project value). ID permits $150-280. Frost depth 36-42″ across most of the state.
How deep do footings need to be for a Fiberon deck in Idaho?▾
Idaho's frost depth is approximately 36″. Fiberon doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10-12″ depending on tributary area. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Fiberon worth the money in Idaho?▾
Fiberon vs PT pine over 25 years in Idaho: PT pine = ~$38/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $118/sqft total. Fiberon mid-tier = $61/sqft installed + $0 maintenance = $61/sqft total. Fiberon typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for Fiberon deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.