Fiberon Deck Cost in Arkansas
A Fiberon deck in Arkansas costs $35-$87/sqft installed with the state's 0.92× labor multiplier (South). Fiberon (Fortune Brands company) makes 3 main lines: Paramount (entry PVC), Promenade (mid composite), Sanctuary (premium capped composite). Strong value across all tiers — typically prices 5-10% under Trex equivalents. Arkansas labor 0.92× national — among the cheapest in the US. Decent value for big projects.
Fiberon cost by deck size in Arkansas
Mid-tier Fiberon (Fiberon Promenade) at Arkansas's 0.92× labor multiplier — ~$44/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($140 baseline + 1.2% of project value), demolition (if replacing), and footings for 12″ frost depth.
Fiberon product lines in Arkansas
Fiberon installed cost ranges from $38/sqft (Paramount on PT framing) to $95/sqft (Sanctuary Cinnabar on premium railing). Sanctuary is the highest-rated composite in independent durability tests — multiply by your state labor multiplier.
Arkansas-specific notes
Get a precise Fiberon quote for Arkansas
Open the Fiberon Deck Calculator with AR pre-selected to dial in your exact size, board line, and railing choices.
FAQ — Fiberon in Arkansas
How much does a Fiberon deck cost in Arkansas?▾
In Arkansas, Fiberon decking costs $35-$87/sqft installed (national $38-$95/sqft × Arkansas's 0.92× labor multiplier). A typical 16×20 (320 sqft) Fiberon deck lands around $19,520. Mid-tier Fiberon Promenade runs about $14,080 for the same scope.
Which Fiberon line is best for Arkansas's climate?▾
Arkansas's humid climate favors capped composite or PVC over generic composite — Fiberon Sanctuary performs best in this environment. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a Fiberon deck in Arkansas?▾
Arkansas permit fees typically run $105-$259 depending on jurisdiction and project value — most calculators use max(regional baseline $140, 1.2% of project value). Most AR jurisdictions modest fees ($120-180). Some small towns require no permit at all.
How deep do footings need to be for a Fiberon deck in Arkansas?▾
Arkansas's frost depth is approximately 12″. Fiberon doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10″ for typical loads. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is Fiberon worth the money in Arkansas?▾
Fiberon vs PT pine over 25 years in Arkansas: PT pine = ~$28/sqft installed + ~$2/sqft/yr maintenance (stain/seal annually) = $85/sqft total. Fiberon mid-tier = $44/sqft installed + $0 maintenance = $44/sqft total. Fiberon typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.