TimberTech Deck Cost in Oregon
A TimberTech deck in Oregon costs $54-$134/sqft installed with the state's 1.28× labor multiplier (West). TimberTech (owned by AZEK Company) makes 3 lines: Edge Prime+ (capped composite entry), Pro Legacy (premium capped composite), and AZEK Vintage/Harvest/Arbor (cellular PVC top tier). PVC lines outperform composite on heat + moisture but cost ~20-30% more. Oregon labor 1.28× national. Pacific Northwest rain + moss favor composite over PT.
TimberTech cost by deck size in Oregon
Mid-tier TimberTech (TimberTech Pro Legacy) at Oregon's 1.28× labor multiplier — ~$74/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($290 baseline + 1.2% of project value), demolition (if replacing), and footings for 18″ frost depth.
TimberTech product lines in Oregon
TimberTech installed cost ranges from $42/sqft (Edge Prime+ on PT framing) to $105/sqft (AZEK Harvest on premium railing). The PVC lines (AZEK Vintage Mahogany / AZEK Harvest Slate Gray) command the top of the range — multiply by your state labor multiplier.
Oregon-specific notes
Get a precise TimberTech quote for Oregon
Open the TimberTech Deck Calculator with OR pre-selected to dial in your exact size, board line, and railing choices.
FAQ — TimberTech in Oregon
How much does a TimberTech deck cost in Oregon?▾
In Oregon, TimberTech decking costs $54-$134/sqft installed (national $42-$105/sqft × Oregon's 1.28× labor multiplier). A typical 16×20 (320 sqft) TimberTech deck lands around $30,080. Mid-tier TimberTech Pro Legacy runs about $23,680 for the same scope.
Which TimberTech line is best for Oregon's climate?▾
Oregon's Pacific Northwest rain favors capped composite or PVC over PT pine — better moisture resistance. TimberTech AZEK Vintage performs well in this environment with proper drainage gap (1/8″-3/16″ side-to-side).
What's the permit fee for a TimberTech deck in Oregon?▾
Oregon permit fees typically run $218-$537 depending on jurisdiction and project value — most calculators use max(regional baseline $290, 1.2% of project value). OR permits $250-380. Coastal salt-air notes.
How deep do footings need to be for a TimberTech deck in Oregon?▾
Oregon's frost depth is approximately 18″. TimberTech doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10″ for typical loads. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is TimberTech worth the money in Oregon?▾
TimberTech vs PT pine over 25 years in Oregon: PT pine = ~$38/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $118/sqft total. TimberTech mid-tier = $74/sqft installed + $0 maintenance = $74/sqft total. TimberTech typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for TimberTech deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.