TimberTech Deck Cost in North Dakota
A TimberTech deck in North Dakota costs $42-$105/sqft installed with the state's 1.00× labor multiplier (Midwest). TimberTech (owned by AZEK Company) makes 3 lines: Edge Prime+ (capped composite entry), Pro Legacy (premium capped composite), and AZEK Vintage/Harvest/Arbor (cellular PVC top tier). PVC lines outperform composite on heat + moisture but cost ~20-30% more. North Dakota frost depth 60″ — deepest among Midwest states. Labor 1.00× national.
TimberTech cost by deck size in North Dakota
Mid-tier TimberTech (TimberTech Pro Legacy) at North Dakota's 1.00× labor multiplier — ~$58/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($175 baseline + 1.2% of project value), demolition (if replacing), and footings for 60″ frost depth.
TimberTech product lines in North Dakota
TimberTech installed cost ranges from $42/sqft (Edge Prime+ on PT framing) to $105/sqft (AZEK Harvest on premium railing). The PVC lines (AZEK Vintage Mahogany / AZEK Harvest Slate Gray) command the top of the range — multiply by your state labor multiplier.
North Dakota-specific notes
Get a precise TimberTech quote for North Dakota
Open the TimberTech Deck Calculator with ND pre-selected to dial in your exact size, board line, and railing choices.
FAQ — TimberTech in North Dakota
How much does a TimberTech deck cost in North Dakota?▾
In North Dakota, TimberTech decking costs $42-$105/sqft installed (national $42-$105/sqft × North Dakota's 1.00× labor multiplier). A typical 16×20 (320 sqft) TimberTech deck lands around $23,680. Mid-tier TimberTech Pro Legacy runs about $18,560 for the same scope.
Which TimberTech line is best for North Dakota's climate?▾
North Dakota's freeze-thaw cycles favor PVC over composite where budget allows. TimberTech AZEK Vintage works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a TimberTech deck in North Dakota?▾
North Dakota permit fees typically run $131-$324 depending on jurisdiction and project value — most calculators use max(regional baseline $175, 1.2% of project value). ND permits $150-250.
How deep do footings need to be for a TimberTech deck in North Dakota?▾
North Dakota's frost depth is approximately 60″. TimberTech doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 12-14″ to handle the deep footings. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is TimberTech worth the money in North Dakota?▾
TimberTech vs PT pine over 25 years in North Dakota: PT pine = ~$30/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $93/sqft total. TimberTech mid-tier = $58/sqft installed + $0 maintenance = $58/sqft total. TimberTech typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for TimberTech deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.