TimberTech Deck Cost in Louisiana
A TimberTech deck in Louisiana costs $39-$97/sqft installed with the state's 0.92× labor multiplier (South). TimberTech (owned by AZEK Company) makes 3 lines: Edge Prime+ (capped composite entry), Pro Legacy (premium capped composite), and AZEK Vintage/Harvest/Arbor (cellular PVC top tier). PVC lines outperform composite on heat + moisture but cost ~20-30% more. Louisiana labor 0.92× national. Salt-air + humidity + hurricane uplift — go PVC + 316SS hardware.
TimberTech cost by deck size in Louisiana
Mid-tier TimberTech (TimberTech Pro Legacy) at Louisiana's 0.92× labor multiplier — ~$53/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($140 baseline + 1.2% of project value), demolition (if replacing), and footings for 0″ frost depth.
TimberTech product lines in Louisiana
TimberTech installed cost ranges from $42/sqft (Edge Prime+ on PT framing) to $105/sqft (AZEK Harvest on premium railing). The PVC lines (AZEK Vintage Mahogany / AZEK Harvest Slate Gray) command the top of the range — multiply by your state labor multiplier.
Louisiana-specific notes
Get a precise TimberTech quote for Louisiana
Open the TimberTech Deck Calculator with LA pre-selected to dial in your exact size, board line, and railing choices.
FAQ — TimberTech in Louisiana
How much does a TimberTech deck cost in Louisiana?▾
In Louisiana, TimberTech decking costs $39-$97/sqft installed (national $42-$105/sqft × Louisiana's 0.92× labor multiplier). A typical 16×20 (320 sqft) TimberTech deck lands around $21,760. Mid-tier TimberTech Pro Legacy runs about $16,960 for the same scope.
Which TimberTech line is best for Louisiana's climate?▾
Louisiana's humid climate favors PVC lines like AZEK Vintage or TimberTech AZEK — no wood content means no moisture absorption. Salt-air coastal areas (Gulf Coast, Atlantic) need 316SS hardware regardless of brand.
What's the permit fee for a TimberTech deck in Louisiana?▾
Louisiana permit fees typically run $105-$259 depending on jurisdiction and project value — most calculators use max(regional baseline $140, 1.2% of project value). LA permits $150-250. Hurricane uplift connectors required in coastal parishes.
How deep do footings need to be for a TimberTech deck in Louisiana?▾
Louisiana's frost depth is approximately 0″. TimberTech doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10″ for typical loads. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is TimberTech worth the money in Louisiana?▾
TimberTech vs PT pine over 25 years in Louisiana: PT pine = ~$28/sqft installed + ~$2/sqft/yr maintenance (stain/seal annually) = $85/sqft total. TimberTech mid-tier = $53/sqft installed + $0 maintenance = $53/sqft total. TimberTech typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for TimberTech deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.