TimberTech Deck Cost in Colorado
A TimberTech deck in Colorado costs $54-$134/sqft installed with the state's 1.28× labor multiplier (West). TimberTech (owned by AZEK Company) makes 3 lines: Edge Prime+ (capped composite entry), Pro Legacy (premium capped composite), and AZEK Vintage/Harvest/Arbor (cellular PVC top tier). PVC lines outperform composite on heat + moisture but cost ~20-30% more. Colorado's freeze-thaw cycles favor PVC over composite. Frost depth 30″+ means deeper footings = larger budget line.
TimberTech cost by deck size in Colorado
Mid-tier TimberTech (TimberTech Pro Legacy) at Colorado's 1.28× labor multiplier — ~$74/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($290 baseline + 1.2% of project value), demolition (if replacing), and footings for 30″ frost depth.
TimberTech product lines in Colorado
TimberTech installed cost ranges from $42/sqft (Edge Prime+ on PT framing) to $105/sqft (AZEK Harvest on premium railing). The PVC lines (AZEK Vintage Mahogany / AZEK Harvest Slate Gray) command the top of the range — multiply by your state labor multiplier.
Colorado-specific notes
Get a precise TimberTech quote for Colorado
Open the TimberTech Deck Calculator with CO pre-selected to dial in your exact size, board line, and railing choices.
FAQ — TimberTech in Colorado
How much does a TimberTech deck cost in Colorado?▾
In Colorado, TimberTech decking costs $54-$134/sqft installed (national $42-$105/sqft × Colorado's 1.28× labor multiplier). A typical 16×20 (320 sqft) TimberTech deck lands around $30,080. Mid-tier TimberTech Pro Legacy runs about $23,680 for the same scope.
Which TimberTech line is best for Colorado's climate?▾
Colorado's freeze-thaw cycles favor PVC over composite where budget allows. TimberTech AZEK Vintage works well in snow regions when properly fastened with the right expansion gap.
What's the permit fee for a TimberTech deck in Colorado?▾
Colorado permit fees typically run $218-$537 depending on jurisdiction and project value — most calculators use max(regional baseline $290, 1.2% of project value). Denver permit $180-300. Frost depth 30-36″ across the front range.
How deep do footings need to be for a TimberTech deck in Colorado?▾
Colorado's frost depth is approximately 30″. TimberTech doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 10-12″ depending on tributary area. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is TimberTech worth the money in Colorado?▾
TimberTech vs PT pine over 25 years in Colorado: PT pine = ~$38/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $118/sqft total. TimberTech mid-tier = $74/sqft installed + $0 maintenance = $74/sqft total. TimberTech typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for TimberTech deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.