AZEK Deck Cost in North Dakota
A AZEK deck in North Dakota costs $55-$120/sqft installed with the state's 1.00× labor multiplier (Midwest). AZEK is the cellular-PVC premium brand (now part of TimberTech but sold under the AZEK name). 100% PVC core (no wood content) — termite + mold proof, scratch-resistant cap, lowest CTE of any major brand. Top of the deck-board pyramid. North Dakota frost depth 60″ — deepest among Midwest states. Labor 1.00× national.
AZEK cost by deck size in North Dakota
Mid-tier AZEK (AZEK Vintage Mahogany) at North Dakota's 1.00× labor multiplier — ~$72/sqft installed.
Cost ranges include materials + labor + standard railing. Excludes permit ($175 baseline + 1.2% of project value), demolition (if replacing), and footings for 60″ frost depth.
AZEK product lines in North Dakota
AZEK installed cost ranges from $55/sqft (Vintage Coastline on standard framing) to $120/sqft (Harvest Slate Gray on premium engineered framing with PVC railing). PVC is the priciest mainstream deck-board option but has the longest warranty + lowest maintenance.
North Dakota-specific notes
Get a precise AZEK quote for North Dakota
Open the AZEK Deck Calculator with ND pre-selected to dial in your exact size, board line, and railing choices.
FAQ — AZEK in North Dakota
How much does a AZEK deck cost in North Dakota?▾
In North Dakota, AZEK decking costs $55-$120/sqft installed (national $55-$120/sqft × North Dakota's 1.00× labor multiplier). A typical 16×20 (320 sqft) AZEK deck lands around $28,160. Mid-tier AZEK Vintage Mahogany runs about $23,040 for the same scope.
Which AZEK line is best for North Dakota's climate?▾
North Dakota's freeze-thaw cycles favor PVC over composite where budget allows. AZEK PVC is the top performer for snow regions — no swelling/contracting from freeze-thaw.
What's the permit fee for a AZEK deck in North Dakota?▾
North Dakota permit fees typically run $131-$324 depending on jurisdiction and project value — most calculators use max(regional baseline $175, 1.2% of project value). ND permits $150-250.
How deep do footings need to be for a AZEK deck in North Dakota?▾
North Dakota's frost depth is approximately 60″. AZEK doesn't change the footing requirement — that's IRC R403.1.4-driven by frost line. Use Sonotube 12-14″ to handle the deep footings. Verify with your local building department since AHJs sometimes require deeper depths than the state-published value.
Is AZEK worth the money in North Dakota?▾
AZEK vs PT pine over 25 years in North Dakota: PT pine = ~$30/sqft installed + ~$3/sqft/yr maintenance (stain/seal annually) = $93/sqft total. AZEK mid-tier = $72/sqft installed + $0 maintenance = $72/sqft total. AZEK typically wins the 25-yr TCO comparison by 20-40%, plus better resale value.
Other states for AZEK deck cost
Get matched
Want 2–3 free quotes for this exact deck?
We'll send your plan to vetted local builders. Free, no obligation.