DeckMath
Oregon · 16×16 (256 sqft) · 2026-Q1 retail

16×16 Deck Cost in Oregon

A 16×16 (256 sqft) deck in Oregon costs $16,384-$26,112 in mid-tier composite with the state's 1.28× labor multiplier (West). A 16×16 square deck (256 sqft) is a popular 'big enough for a party' build — clean square geometry minimizes complexity. Oregon labor 1.28× national. Pacific Northwest rain + moss favor composite over PT.

256 sqft1.28× laborFrost 18rain climate64 lf perimeter
Area
256 sqft
16×16
PT pine (budget)
$8,192-13,056
$32-51/sqft installed
Mid composite
$16,384-26,112
$64-102/sqft installed
Luxury PVC
$24,576-36,096
$96-141/sqft installed

5 finish tiers — 16×16 in Oregon

National $/sqft × Oregon's 1.28× labor multiplier × 256 sqft = total installed cost. Materials + labor + standard railing included.

Tier
$/sqft
Total low
Total high
Budget · Pressure-treated
PT pine
$32-$51
$8,192
$13,056
Mid · Cedar / premium PT
Cedar
$45-$70
$11,520
$17,920
Premium · Mid composite
Trex Transcend, Fiberon Sanctuary
$64-$102
$16,384
$26,112
Luxury · Premium composite
TimberTech AZEK, Trex Signature
$96-$141
$24,576
$36,096
Exotic · Tropical hardwood
IPE, Cumaru
$115-$179
$29,440
$45,824

Excludes permit ($218-$537 typical in Oregon), demolition (if replacing), and exceptional framing for 18″ frost depth. OR permits $250-380. Coastal salt-air notes.

16×16 framing notes for Oregon

Joist size
2×8 @ 16″ OC
Span 16 ft requires 2×8 SYP at standard 16″ OC. Check Joist Span Calculator for exact spans by species + spacing.
Beam configuration
1-2 beams
A 16×16 deck typically needs 1-2 beams depending on whether you can drop joists onto the beam (1) or hang them flush (2+).
Post count
4 posts
6×6 PT posts at 4-post layout typical. Footings extend below 18″ frost line.
Footings
4 × 18″ deep
Sonotube 10-12″ diameter at 18″ depth per IRC R403.1.4. Concrete budget: ~$230.
Decking
423 lf
256 sqft × 1.65 lf/sqft = 423 lf of deck boards at 16″ joist OC. Add 5-7% waste for cuts.
Railing
64 lf perimeter
64 lf of railing (~$36/lf mid composite, ~$22/lf wood). Stairs need 2 extra handrails (1 each side).

Oregon considerations

Labor multiplier
1.28×
West region labor pricing on all installed costs.
Frost depth
18″
Footings extend below frost line per IRC R403.1.4. Standard footing depth.
Climate
rain
PNW rain: capped composite + proper drainage gap critical.
Top metros
Portland · Salem · Eugene
Major metros drive installer availability + pricing pressure.
Permit fee
$218-$537
OR permits $250-380. Coastal salt-air notes.
Region
West
West regional pricing applied. Multiply national $/sqft by 1.28× for Oregon installed cost.

Get a precise quote for your 16×16 deck in Oregon

Open the Deck Cost Calculator with OR pre-selected and dial in your exact size, framing, material, and railing choices.

FAQ — 16×16 deck in Oregon

How much does a 16×16 deck cost in Oregon?

In Oregon, a 16×16 (256 sqft) deck costs $8,192-$13,056 in pressure-treated, $16,384-$26,112 in mid-range composite (Trex Transcend / Fiberon Sanctuary), and $24,576-$36,096 in luxury composite/PVC (TimberTech AZEK / Trex Signature). Numbers reflect Oregon's 1.28× labor multiplier on 2026-Q1 retail.

What's the cheapest way to build a 16×16 deck in Oregon?

Cheapest = ground-level pressure-treated pine with no railings (where exempt under 30″ height) — ~$6,554-$9,830 in Oregon. Add stairs + railings + above-grade framing and the build goes to ~$9,175-$13,107. DIY saves 30-50% on labor but requires permit + inspection coordination yourself.

How long does it take to build a 16×16 deck in Oregon?

Permit timeline in Oregon: 2-6 weeks depending on jurisdiction. Construction time for a 16×16: pro crew = 5-8 days for framing + boards + railings + stairs. DIY = 3-5 weekends for experienced DIYer. Allow extra time for permit approval + inspections.

What framing do I need for a 16×16 deck in Oregon?

IRC R507-compliant framing for a 16×16 deck typically uses 2×8 joists at 16″ OC for spans up to 12 ft, 2×10 joists for spans 12-16 ft. Oregon's frost depth is 18″ — footings must extend below that per IRC R403.1.4. Sonotube 10-12″ diameter at 18″ depth is typical. Verify with your local building department.

Is composite worth it for a 16×16 deck in Oregon?

Over 25 years in Oregon: PT pine = ~$9,830 install + ~$20,480 maintenance (stain every 2-3 yr) = $30,310 total. Mid composite = ~$19,005 install + $0 maintenance = $19,005 total. Composite wins by 59-81% over 25-yr lifecycle PLUS better resale value in Oregon's market.

Compare Oregon brand pricing for a 16×16

Same 16×16 in other states