30×24 Deck Cost in Alabama
A 30×24 (720 sqft) deck in Alabama costs $33,120-$53,280 in mid-tier composite with the state's 0.92× labor multiplier (South). A 24×30 deck (720 sqft) approaches commercial-restaurant patio scale — non-prescriptive design likely required. Alabama labor runs ~0.92× national. Humid summers favor composite over PT, but mid-tier composite still beats PT on 25-yr TCO.
5 finish tiers — 30×24 in Alabama
National $/sqft × Alabama's 0.92× labor multiplier × 720 sqft = total installed cost. Materials + labor + standard railing included.
Excludes permit ($105-$259 typical in Alabama), demolition (if replacing), and exceptional framing for 6″ frost depth. Most AL jurisdictions require permits for decks > 30″ off grade or > 200 sqft. Fees typical $100-180.
30×24 framing notes for Alabama
Alabama considerations
Get a precise quote for your 30×24 deck in Alabama
Open the Deck Cost Calculator with AL pre-selected and dial in your exact size, framing, material, and railing choices.
FAQ — 30×24 deck in Alabama
How much does a 30×24 deck cost in Alabama?▾
In Alabama, a 30×24 (720 sqft) deck costs $16,560-$26,640 in pressure-treated, $33,120-$53,280 in mid-range composite (Trex Transcend / Fiberon Sanctuary), and $49,680-$72,720 in luxury composite/PVC (TimberTech AZEK / Trex Signature). Numbers reflect Alabama's 0.92× labor multiplier on 2026-Q1 retail.
What's the cheapest way to build a 30×24 deck in Alabama?▾
Cheapest = ground-level pressure-treated pine with no railings (where exempt under 30″ height) — ~$13,248-$19,872 in Alabama. Add stairs + railings + above-grade framing and the build goes to ~$18,547-$26,496. DIY saves 30-50% on labor but requires permit + inspection coordination yourself.
How long does it take to build a 30×24 deck in Alabama?▾
Permit timeline in Alabama: 2-6 weeks depending on jurisdiction. Construction time for a 30×24: pro crew = 8-14 days for framing + boards + railings + stairs. DIY = 5-8 weekends for experienced DIYer. Allow extra time for permit approval + inspections.
What framing do I need for a 30×24 deck in Alabama?▾
IRC R507-compliant framing for a 30×24 deck typically uses 2×8 joists at 16″ OC for spans up to 12 ft, 2×10 joists for spans 12-16 ft. Alabama's frost depth is 6″ — footings must extend below that per IRC R403.1.4. Sonotube 10-12″ diameter at 6″ depth is typical. Verify with your local building department.
Is composite worth it for a 30×24 deck in Alabama?▾
Over 25 years in Alabama: PT pine = ~$19,872 install + ~$41,400 maintenance (stain every 2-3 yr) = $61,272 total. Mid composite = ~$38,419 install + $0 maintenance = $38,419 total. Composite wins by 59-81% over 25-yr lifecycle PLUS better resale value in Alabama's market.