30×24 Deck Cost in Pennsylvania
A 30×24 (720 sqft) deck in Pennsylvania costs $43,920-$70,560 in mid-tier composite with the state's 1.22× labor multiplier (Northeast). A 24×30 deck (720 sqft) approaches commercial-restaurant patio scale — non-prescriptive design likely required. Pennsylvania labor 1.22× national. Frost depth 36-42″.
5 finish tiers — 30×24 in Pennsylvania
National $/sqft × Pennsylvania's 1.22× labor multiplier × 720 sqft = total installed cost. Materials + labor + standard railing included.
Excludes permit ($240-$592 typical in Pennsylvania), demolition (if replacing), and exceptional framing for 36″ frost depth. PA permits $180-320. Philly higher than rural PA.
30×24 framing notes for Pennsylvania
Pennsylvania considerations
Get a precise quote for your 30×24 deck in Pennsylvania
Open the Deck Cost Calculator with PA pre-selected and dial in your exact size, framing, material, and railing choices.
FAQ — 30×24 deck in Pennsylvania
How much does a 30×24 deck cost in Pennsylvania?▾
In Pennsylvania, a 30×24 (720 sqft) deck costs $22,320-$35,280 in pressure-treated, $43,920-$70,560 in mid-range composite (Trex Transcend / Fiberon Sanctuary), and $66,240-$96,480 in luxury composite/PVC (TimberTech AZEK / Trex Signature). Numbers reflect Pennsylvania's 1.22× labor multiplier on 2026-Q1 retail.
What's the cheapest way to build a 30×24 deck in Pennsylvania?▾
Cheapest = ground-level pressure-treated pine with no railings (where exempt under 30″ height) — ~$17,568-$26,352 in Pennsylvania. Add stairs + railings + above-grade framing and the build goes to ~$24,595-$35,136. DIY saves 30-50% on labor but requires permit + inspection coordination yourself.
How long does it take to build a 30×24 deck in Pennsylvania?▾
Permit timeline in Pennsylvania: 2-6 weeks depending on jurisdiction. Construction time for a 30×24: pro crew = 8-14 days for framing + boards + railings + stairs. DIY = 5-8 weekends for experienced DIYer. Allow extra time for permit approval + inspections.
What framing do I need for a 30×24 deck in Pennsylvania?▾
IRC R507-compliant framing for a 30×24 deck typically uses 2×8 joists at 16″ OC for spans up to 12 ft, 2×10 joists for spans 12-16 ft. Pennsylvania's frost depth is 36″ — footings must extend below that per IRC R403.1.4. Sonotube 10-12″ diameter at 36″ depth is typical. Verify with your local building department.
Is composite worth it for a 30×24 deck in Pennsylvania?▾
Over 25 years in Pennsylvania: PT pine = ~$26,352 install + ~$54,900 maintenance (stain every 2-3 yr) = $81,252 total. Mid composite = ~$50,947 install + $0 maintenance = $50,947 total. Composite wins by 59-81% over 25-yr lifecycle PLUS better resale value in Pennsylvania's market.