DeckMath
New Jersey · 10×10 (100 sqft) · 2026-Q1 retail

10×10 Deck Cost in New Jersey

A 10×10 (100 sqft) deck in New Jersey costs $6,100-$9,800 in mid-tier composite with the state's 1.22× labor multiplier (Northeast). A 10×10 deck (100 sqft) is the typical entry-level deck — good for a 4-seat dining set with grill space. New Jersey labor 1.22× national. Coastal areas have additional environmental review.

100 sqft1.22× laborFrost 36snow climate40 lf perimeter
Area
100 sqft
10×10
PT pine (budget)
$3,100-4,900
$31-49/sqft installed
Mid composite
$6,100-9,800
$61-98/sqft installed
Luxury PVC
$9,200-13,400
$92-134/sqft installed

5 finish tiers — 10×10 in New Jersey

National $/sqft × New Jersey's 1.22× labor multiplier × 100 sqft = total installed cost. Materials + labor + standard railing included.

Tier
$/sqft
Total low
Total high
Budget · Pressure-treated
PT pine
$31-$49
$3,100
$4,900
Mid · Cedar / premium PT
Cedar
$43-$67
$4,300
$6,700
Premium · Mid composite
Trex Transcend, Fiberon Sanctuary
$61-$98
$6,100
$9,800
Luxury · Premium composite
TimberTech AZEK, Trex Signature
$92-$134
$9,200
$13,400
Exotic · Tropical hardwood
IPE, Cumaru
$110-$171
$11,000
$17,100

Excludes permit ($240-$592 typical in New Jersey), demolition (if replacing), and exceptional framing for 36″ frost depth. NJ permits $250-450. Coastal towns add Pinelands or CAFRA review.

10×10 framing notes for New Jersey

Joist size
2×8 @ 16″ OC
Span 10 ft requires 2×8 SYP at standard 16″ OC. Check Joist Span Calculator for exact spans by species + spacing.
Beam configuration
1-2 beams
A 10×10 deck typically needs 1-2 beams depending on whether you can drop joists onto the beam (1) or hang them flush (2+).
Post count
4 posts
6×6 PT posts at 4-post layout typical. Footings extend below 36″ frost line.
Footings
4 × 36″ deep
Sonotube 10-12″ diameter at 36″ depth per IRC R403.1.4. Concrete budget: ~$220.
Decking
165 lf
100 sqft × 1.65 lf/sqft = 165 lf of deck boards at 16″ joist OC. Add 5-7% waste for cuts.
Railing
40 lf perimeter
40 lf of railing (~$36/lf mid composite, ~$22/lf wood). Stairs need 2 extra handrails (1 each side).

New Jersey considerations

Labor multiplier
1.22×
Northeast region labor pricing on all installed costs.
Frost depth
36″
Footings extend below frost line per IRC R403.1.4. Standard footing depth.
Climate
snow
Freeze-thaw cycles favor PVC over composite where budget allows.
Top metros
Newark · Jersey City · Paterson
Major metros drive installer availability + pricing pressure.
Permit fee
$240-$592
NJ permits $250-450. Coastal towns add Pinelands or CAFRA review.
Region
Northeast
Northeast regional pricing applied. Multiply national $/sqft by 1.22× for New Jersey installed cost.

Get a precise quote for your 10×10 deck in New Jersey

Open the Deck Cost Calculator with NJ pre-selected and dial in your exact size, framing, material, and railing choices.

FAQ — 10×10 deck in New Jersey

How much does a 10×10 deck cost in New Jersey?

In New Jersey, a 10×10 (100 sqft) deck costs $3,100-$4,900 in pressure-treated, $6,100-$9,800 in mid-range composite (Trex Transcend / Fiberon Sanctuary), and $9,200-$13,400 in luxury composite/PVC (TimberTech AZEK / Trex Signature). Numbers reflect New Jersey's 1.22× labor multiplier on 2026-Q1 retail.

What's the cheapest way to build a 10×10 deck in New Jersey?

Cheapest = ground-level pressure-treated pine with no railings (where exempt under 30″ height) — ~$2,440-$3,660 in New Jersey. Add stairs + railings + above-grade framing and the build goes to ~$3,416-$4,880. DIY saves 30-50% on labor but requires permit + inspection coordination yourself.

How long does it take to build a 10×10 deck in New Jersey?

Permit timeline in New Jersey: 2-6 weeks depending on jurisdiction. Construction time for a 10×10: pro crew = 3-5 days for framing + boards + railings + stairs. DIY = 2-3 weekends for experienced DIYer. Allow extra time for permit approval + inspections.

What framing do I need for a 10×10 deck in New Jersey?

IRC R507-compliant framing for a 10×10 deck typically uses 2×8 joists at 16″ OC for spans up to 12 ft, 2×10 joists for spans 12-16 ft. New Jersey's frost depth is 36″ — footings must extend below that per IRC R403.1.4. Sonotube 10-12″ diameter at 36″ depth is typical. Verify with your local building department.

Is composite worth it for a 10×10 deck in New Jersey?

Over 25 years in New Jersey: PT pine = ~$3,660 install + ~$7,625 maintenance (stain every 2-3 yr) = $11,285 total. Mid composite = ~$7,076 install + $0 maintenance = $7,076 total. Composite wins by 59-81% over 25-yr lifecycle PLUS better resale value in New Jersey's market.

Compare New Jersey brand pricing for a 10×10

Same 10×10 in other states