10×8 Deck Cost in California
A 10×8 (80 sqft) deck in California costs $5,120-$8,160 in mid-tier composite with the state's 1.28× labor multiplier (West). An 8×10 deck (80 sqft) is the smallest practical deck size — barely fits a 4-person bistro set. Most affordable build in this list. California labor is 1.28× national, the most expensive bracket alongside Northeast. Title 24 efficiency rules don't typically apply to decks but verify if integrating outdoor lighting.
5 finish tiers — 10×8 in California
National $/sqft × California's 1.28× labor multiplier × 80 sqft = total installed cost. Materials + labor + standard railing included.
Excludes permit ($218-$537 typical in California), demolition (if replacing), and exceptional framing for 12″ frost depth. CA jurisdictions widely vary — SF Bay Area can require additional seismic anchoring. Permit fees $250-450.
10×8 framing notes for California
California considerations
Get a precise quote for your 10×8 deck in California
Open the Deck Cost Calculator with CA pre-selected and dial in your exact size, framing, material, and railing choices.
FAQ — 10×8 deck in California
How much does a 10×8 deck cost in California?▾
In California, a 10×8 (80 sqft) deck costs $2,560-$4,080 in pressure-treated, $5,120-$8,160 in mid-range composite (Trex Transcend / Fiberon Sanctuary), and $7,680-$11,280 in luxury composite/PVC (TimberTech AZEK / Trex Signature). Numbers reflect California's 1.28× labor multiplier on 2026-Q1 retail.
What's the cheapest way to build a 10×8 deck in California?▾
Cheapest = ground-level pressure-treated pine with no railings (where exempt under 30″ height) — ~$2,048-$3,072 in California. Add stairs + railings + above-grade framing and the build goes to ~$2,867-$4,096. DIY saves 30-50% on labor but requires permit + inspection coordination yourself.
How long does it take to build a 10×8 deck in California?▾
Permit timeline in California: 2-6 weeks depending on jurisdiction. Construction time for a 10×8: pro crew = 3-5 days for framing + boards + railings + stairs. DIY = 2-3 weekends for experienced DIYer. Allow extra time for permit approval + inspections.
What framing do I need for a 10×8 deck in California?▾
IRC R507-compliant framing for a 10×8 deck typically uses 2×8 joists at 16″ OC for spans up to 12 ft, 2×10 joists for spans 12-16 ft. California's frost depth is 12″ — footings must extend below that per IRC R403.1.4. Sonotube 10-12″ diameter at 12″ depth is typical. Verify with your local building department.
Is composite worth it for a 10×8 deck in California?▾
Over 25 years in California: PT pine = ~$3,072 install + ~$6,400 maintenance (stain every 2-3 yr) = $9,472 total. Mid composite = ~$5,939 install + $0 maintenance = $5,939 total. Composite wins by 59-81% over 25-yr lifecycle PLUS better resale value in California's market.